The DeVault Infinity Single Barrel Shotgun

The Infinity pictured above is our standard shotgun. The wood featured is standard on our up-coming models. English and Myrtle wood will also be available as supply allows.

The stock has no bolt hole, allowing for a generous depth of cut comb, 1-3/4" deep.

Many people have asked why the gun is lighter and kicks less. With no bolt hole, the recoil does not travel back the bolt and transfer the recoil to the shoulder. The wood acts as a buffer and absorbs some of the felt recoil through the wood density.

If the comb does have to be moved over, your jaw should not be affected by the split line.

With no bolt hole we dropped the pistol grip down and we can now put as much toe out, offset and heel drop for a deep drop Monte Carlo. 

The folks with the long necks can now be fit allowing for maximum comfort and reduced felt recoil. Innovation, fresh, clean,  not coping from old outdated designs.

The lines are clean, the rib has been channeled out allowing for weight reduction. 3 different rib heights to chose from allowing infinite possibilities for POI.

The Infinity has one of the smallest profile receivers of any shotgun available today.

We are 1-3/8" thick & 2-1/4" high. With the radius on the top of the receiver, your viewing area around the gun is greatly expanded.

This low profile sets the barrel further down in the receiver allowing for the recoil to came straight back and not up in the face.