Stock refinishing is another area that Devault Industries LLC offers to our customers. This finish is the same product that is used in our Infinity Shotguns. The finish is an Automotive clear coat with an epoxy hardener additive.
When your stock arrives we send it to the wood room and begin the stripping process, next all the dings and dents are sanded out or we raise the grain to remove the imperfections. Once finish sanding is done the wood goes to the finish room. The stock will receive 12 to 16 coats of finish to insure the grain is full and the desired look is achieved.
We do not use any fillers, stains, or sanding fillers to fill the pores of the wood prior to refinish. You pay good money for your wood and it is a crime to cover the natural beauty of the grain with a paste filler. Many companies use the paste filler to fill the pores and in doing that it requires less material in spray finishing. We use the finish as a filler and when we are done all the beauty of the natural wood is brought out.  We have had customers when they receive their refinished wood call and ask if we sent the wrong piece of wood back to them. They tell us that they didn't know the wood had that much grain. All the stocks are hand sanded and between applications and can be done in a High Gloss or a Matt finish that resembles oil. Our re-finish process strips out all the color dies and fillers that were there from the factory. In the stripping process we remove the stuff that turns yellow and cloudy and makes the stock appear dull and lackluster.
When the finish work is done the borders of your checkering are re-cut and the checkering is resealed. If your checkering is worn it can be completely re-checkered upon request. This service is POR.

Cost for this re-finish service is $ 500.00